Bath countertop updating romeo show double dating
It gives your concrete a nice, smooth finish with a slight sheen.
It also darkens the concrete up a bit, which I like. Also, take care to apply sufficient sealer around the inner edge of the hole where your drain will sit, otherwise water may seep into the concrete, which you do not want.10) After the sealer dries, install your new faucet (or reinstall your old faucet).
Not too shabby for a completely transformed countertop!
With a proper sealer though it could last a long time!
DO YOU HAVE OUTDATED, CULTURED MARBLE VANITIES THAT YOU WANT TO UPDATE ON A BUDGET? We had successfully created our own DIY concrete fireplace and loved the results, so we took a risk and decided to attempt the same technique on our vanity. Pour some of the dry mix into your drywall tray, add water and mix it with a small putty knife.
Now it is ready to work with.4) Apply your first coat of concrete to the entire cultured marble countertop and any backsplash.
You want to apply a THIN coat–do not strive for full coverage on the first coat. It dries fairly quickly, but I allowed each coat to dry overnight because I was working on it at night anyway. NOTE: If you applied your first coat too thickly and there are significant imperfections, you may be better off using an electric sander.7) Repeat steps 4- 6 until you achieve the coverage you want.
This requires a little bit of trial and error, but I would say as a rule of thumb, you can smooth it out with a sponge about 10 to 20 minutes after you have applied it.